Disposable Non-Woven Sleeve / Arm Covers
Breathable PP non-woven arm covers with elastic at both ends — keep forearms and sleeves clean during nursing, lab, food-handling and cleaning work.
- Material
- PP spunbond non-woven · 25 / 28 / 35 gsm
- Sizes
- 40×40 cm, 40×22 cm (and as required)
- Colour
- White, blue
- Packaging
- 100 pcs / bag · 20 bags / carton
Bulk & wholesale supply · Supplied to ISO 9001 / ISO 13485 quality standards
A non-woven sleeve cover is a single-use tube of PP spunbond fabric pulled over the forearm to keep sleeves and skin clean during light, dry and dusty work. WinHyCare supplies breathable PP non-woven arm covers in white and blue, with elastic at both ends for a secure fit, in 25, 28 and 35 gsm weights, packed 100 pieces per bag and 20 bags per carton.
Why choose this non-woven sleeve covers
- Breathable PP spunbond non-woven keeps forearms cool during longer wear
- Elastic at both ends grips the wrist and upper arm so the cover stays in place
- Protects sleeves, cuffs and skin from soiling, dust and light splashes
- Three weights — 25, 28 and 35 gsm — to balance economy and durability
- Available in white or blue, with sizes from 40×22 cm to 40×40 cm or as required
- Light, lint-controlled and economical for high-turnover single-use
What are non-woven sleeve covers?
A non-woven sleeve cover — also called an arm cover or oversleeve — is a single-use fabric tube that slips over the forearm from wrist to elbow (or higher) to keep the wearer's sleeves and skin clean. It is used in dry, dusty and light-soiling work where a full gown would be excessive but bare or uniformed forearms would otherwise pick up dust, powder, food residue or grime. Worn once and discarded, it keeps cuffs clean between tasks and helps break cross-contamination.
WinHyCare non-woven sleeve covers are made from PP spunbond non-woven fabric, which is soft, breathable and low-linting. Elastic bands are sewn into both ends so the cover grips the wrist at one end and the upper arm at the other, holding it firmly in place during reaching, lifting and handling without sliding down.
Material, breathability and weights
The fabric is PP (polypropylene) spunbond non-woven, the same family of breathable material used in caps, gowns and masks. Because it is air-permeable, the forearm stays cooler and drier than it would under a plastic sleeve, which makes the non-woven cover the comfortable choice for longer, dry tasks. The trade-off is that non-woven is splash-resistant rather than fully waterproof — for genuinely wet work, a PE sleeve cover is the better option.
The covers come in three weights — 25, 28 and 35 gsm. Lighter 25 gsm is the most economical for short, clean tasks; 35 gsm is more robust and resists snagging and tearing during handling. Sizes range from a shorter 40×22 cm to a longer 40×40 cm, and can be cut to other dimensions as required.
Fit and protection
The double-elastic design is what keeps a sleeve cover useful. With elastic at both the wrist and the upper end, the cover seals against the arm at both ends so dust and debris cannot work their way in, and it does not creep down as the wearer moves. The fit is universal — the elastic stretches over a wide range of arm sizes — so one stock size serves a whole team.
Sleeve covers are typically worn in pairs and changed when soiled or between contamination zones. They protect not only the wearer's uniform from staining and wear but also the product or patient from anything shed by the sleeve, which matters in food handling, electronics and clean work as much as in clinical settings.
Packaging and bulk supply
Non-woven sleeve covers are supplied 100 pieces per bag with 20 bags per carton, so a single carton holds 2,000 covers — practical for teams that get through them by the pair throughout a shift. Colour, weight and size can be specified to suit the work and the contamination-control scheme.
WinHyCare is a Dubai-headquartered supplier and exporter of the full disposables range. Non-woven sleeve covers are delivered in bulk cartons to hospitals, laboratories, food units, electronics assembly and cleaning companies across the Middle East, Africa and India — exported from our Dubai HQ and warehouse, with India service via our Hyderabad centre. Products are supplied to ISO 9001 / ISO 13485 quality standards.
Where the non-woven sleeve covers is used
Supplied in bulk to healthcare, laboratory, food-industry and institutional buyers across India, the Middle East and Africa.
Nursing & Patient Care
Worn over uniform sleeves during patient handling and ward tasks to keep cuffs clean and reduce cross-contamination.
Laboratories
Forearm protection for technicians handling samples, powders and reagents in diagnostic and research labs.
Food Handling
Breathable arm covers for dry food prep, packing and bakery work where sleeves must stay clean and lint-controlled.
Cleaning & Housekeeping
Protect forearms and uniform sleeves from dust and grime during dry cleaning and maintenance tasks.
Electronics & Assembly
Low-lint PP covers help keep skin oils and fibres off components on assembly and inspection lines.
Pharma & Cleanrooms
Single-use oversleeves add a forearm barrier within controlled production and packing areas.
Non-Woven Sleeve Covers — Specifications
| Product | Disposable Non-Woven Sleeve / Arm Cover |
|---|---|
| Material | PP spunbond non-woven |
| Colour | White, blue |
| Sizes | 40×40 cm, 40×22 cm (and as required) |
| Weight | 25 / 28 / 35 gsm |
| Style | Elastic at both ends |
| Characteristics | Breathable, splash-resistant, low-lint, single-use |
| Packaging | 100 pcs / bag, 20 bags / carton |
Specifications and pack sizes can be customised (size, gsm, colour, sterile/non-sterile, private-label) for bulk and tender orders. Supplied to ISO 9001 / ISO 13485 quality standards.