The dialysis chair consists of 3 main parts: back, seat and foot. It has the ability to perform back up / down, height adjustment, foot part up / down and trendelenburg / reverse trendelenburg movements with 4 DC motors commanded by hand control. There is a cramping step and head that can be disassembled and adjusted at the desired level. The cramping step is 10 cm. can be adjusted according to the size of the patient by pulling up to. The hood can be adjusted to the patient’s height. Nape cushion is provided with the seat. Thus, patient comfort is prioritized. The seat is made of artificial leather, which can be wiped without staining, covered with liquid-absorbing material, easy to clean, hygienic, will not cause perspiration and itching in long sessions and will not burn easily. The sponge used in the upholstery is visco-elastic and designed to take the shape of the body by spreading the pressure load of the patient over a large area and does not prevent micro blood circulation. Abs coverings outside the seat are designed to remain in the upholstery and prevent dirt, etc. between the upholstery and the plastic. The arm portions can be adjusted in the desired direction, moving at the right ratio with the movements of the back of the seat does not disturb the parallelism to the ground. The main body (chassis) of the device is manufactured to be safe from tipping. Chassis main support frame 14 mm. It is made of sheet metal and the lifting system is mounted on 20 mm steel plate carrier. Dialysis chair can be used for dialysis, oncology, chemotherapy, rehabilitation, blood collection and plasmapheresis treatment. Optional TV, food stand and serum hanger can be connected. It can be fixed in any place by means of 4 lockable wheels and can be carried easily.